Tu carrito está vacío.
Tu carrito está vacío.



AT-One Beltpack System with ATR35cW

  • Simple to set up and use
  • 2 x 4 channel frequency plan for enhanced flexibility
  • Rack mountable for easy installation
  • Intuitive receiver and transmitter controls
  • ATR35cW omnidirectional condenser lavalier microphone
  • Up to 10 hours battery life




AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11/P comes equipped with the ATR35cW tie-clip microphone.

  • Designed for quick and easy use
  • Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
  • The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
  • Users can choose up to 4 channels in a group
  • The ATW-11 system is equipped with a discreet and robust pocket transmitter
  • RF Transmitting power 10mW
  • Comes with an ATR35cW miniature omnidirectional condenser microphone
  • Up to 10 hours’ battery life with 2 x 1.5V AA batteries
  • RF Indicator light
  • Robust construction from high quality components
  • Delivered in a transport case with a rack mount kit and detachable antennas

“2 X 4 Channels”

AT-One’s frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.

“rf light indicator”

The display on the half-rack receiver clearly indicates both the RF and AF levels.

“12v power”

The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.

delivered in a case

The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case.

easy to use

The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational.

Micro-omni lavalier mic

The AT-One AT-11/P system comes with an ATR35cW omnidirectional lavalier microphone, to provide precise and intelligible speech quality.

removable Antennae

The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.


Overall System
Operating FrequenciesF-Band: 824 – 831 MHz, 863 – 865 MHz
Number Of Channels2 x 4 frequencies
Frequency Stability+/- 0.005%, Phase lock loop frequency control
Modulation ModeFM
Frequency Response60 Hz – 16 kHz
Operating Range60m, typical
Receiving SystemAntenna switching diversity
Image Rejection55dB minimum
Dynamic RangeHH: 108 dB, BP 103 dB (@ max deviation)
Sensitivity10dBµV (S/N 60dB @ 20 kHz deviation)
Total Harmonic Distortion<1% – 20 kHz deviation @ 1 kHz
Audio Output Unbalanced-2dBV
Audio Output Balanced4dBV
Output Connectors (Microphone)Balanced: XLRM-type
Output Connectors (Instrument)Unbalanced: 6.3 mm mono jack
Maximum Output LevelMic / Line (0 / -20dB)
Antenna InputBNC type, 50 – BIAS voltage 12V DC 100mA each
Dimensions200 mm x 42 mm x 122 mm (W x H x D)
Weight418 g without accessories
Accessories IncludedAC Adapter, Antennas, Rack mount adapter, protective carrying case
Belt Pack
RF Power Output10 mW
Spurious EmissionsFollowing national regulations
Input ConnectionsPin 1: GND
Pin 2: INST
Pin 3: Mic
Pin 4: DC Bias +10V
Battery TypeTwo 1.5V AA alkaline (not included)
Battery Life10 hours – depending on battery type and use pattern
Dimensions66 mm x 98 mm x 22 mm (W x H x D)


No hay valoraciones aún.

Sé el primero en valorar “ATW-11/P”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Related products

Cesta de compras

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

Aviso de cookies